Using professional cleaning agents at the correct dosages is one of the main conditions for their safe use and has many advantages: it saves time and money, reduces the environmental burden and, above all, ensures the best cleaning results.
It is important to follow the recommendations in the product's instructions for use
By using the correct dosages, we can reduce the consumption of cleaning agent. There is a common misconception that using a product at higher dosages than stated in the instructions will increase its effectiveness and speed up its action. But is it really such a good idea to add a little extra product just to be on the safe side?
If the product is a concentrate that needs to be diluted with water, always start with the lowest dosage and increase it gradually if necessary to achieve the required cleaning result. However, recommended dosages should not be exceeded when using all-purpose detergents. If the maximum amount does not give the required results, rather than simply adding more cleaning agent, it is better to check whether the product is suitable for the purpose or whether a stronger product is needed.
To use a product most effectively, you need to know how much water is required and what its temperature should be. Dirt, and especially grease, is much easier to remove with hot water, which means that less detergent can be used. However, warm water is not always a good thing: with chlorine-containing products, for example, cold water must always be used. Knowing the correct water temperature is therefore also important for the safe use of products.
Excessive amounts of cleaning agent often lead to negative results
A careless attitude to the amount of cleaning agent used almost always leads to poor results. Dosages that are too low result in poor cleaning quality, while dosages that are too high cause other problems. When an excessively high concentration of cleaning agent is used, the cleaning solution may foam too much, which weakens the cleaning action of the active ingredients. Too high a concentration also reduces the effectiveness of the mechanical action needed for successful cleaning. In addition, after cleaning it takes more time and effort to rinse the detergent off the surface. If the cleaned surface is not rinsed properly, it will remain sticky. As a result, the surface will get dirty faster, as dirt will adhere more strongly to the sticky surface. The drawbacks of excessive concentrations are not limited to poor cleaning results. Excess cleaning agents can also damage surfaces, irritate the skin and increase the negative impact on the environment.
Do not mix products together or change labels: solutions must be prepared in a separate container and stored in appropriately labelled bottles. For example, mixing an acidic product with a chlorine-based one can lead to a dangerous chemical reaction. Cleaning agents must always be transported and stored in sealed containers to avoid spillage. If a spill does occur, the spilled product must be cleaned up immediately; otherwise, someone may slip and be injured, the surface may be damaged, or the product may get on skin or clothing.
Using dosing equipment simplifies the preparation of solutions
Dosing equipment makes it possible to prepare a solution of the product at the required concentration, simplifies the preparation of solutions and makes it safer and more economical. If an automatic dosing device cannot be used, use a hand pump or a dosing container to make sure the amount of cleaning agent is correct. Working solutions are usually used in bottles with sprayers or other attachments. When preparing a solution, estimate in advance how much will be needed so that you do not have to pour away any excess. As a rule, solutions should be used for no more than a week and then replaced with fresh ones. Before preparing a new solution, rinse the bottle with warm water, clean it with a brush (if necessary) and let it dry.
If you still think the amount of cleaning agent used does not matter, let us sum up. Using the correct dosages has many advantages: it ensures better cleaning results, reduces working time, improves occupational safety, saves money and minimises the negative impact on the environment. It is absolutely essential for your well-being.
Klinin offers many comprehensive professional cleaning and hygiene solutions to help you in your work. Contact our managers to find out more!